DIY Joggling Board

Are you handy and like saving money? If so, our DIY joggling board might be the right fit for you and your family!

Purchase modern rockers for a porch that can fit a 6’ – 12’.  

Included from the factory is everything to assemble your joggling board rockers. We teach you how to locally source a 2×12, which you should be able to find for under $40 depending on the size, and how to shape it into a top board for your joggler. See sizing guidance below.  In the box, we also include The Joggle Factory Charleston Green paint and our water-based primer. Other items that ship with the DIY joggling board are listed below.

How is this saving you money? You are mostly saving on shipping.

Purchase rockers for a porch that can fit a 6’ – 12’.  

Recommended tools needed:

• Hammer or mallet
• Wet rag
• Pencil
• Jigsaw with wood cutting blade – the less TPI (teeth per inch) the easier it is to cut, but it will also require more sanding then the higher TPI blades
• Router and 3/4- or 1/2-inch round over bit (OPTIONAL)
• Wood filler (OPTIONAL)
• Ice cold IPA or your favorite beverage

Included in the box:

• 2 unpainted assembled rocker uprights
• 4 unpainted rocker feet
• 4 unpainted finials
• 2 unpainted pin stoppers for use on the top board
• 8 Dominos
• 1 container with glue
• 1 glue brush
• 1 brass plaque
• 1 quart of The Joggle Factory Charleston Green
• 1 quart of water-based primer
• 1 chip brush for painting
• 1 sheet of sandpaper
• 1 1 1/8” paddle drill bit
• 2 nails (for holding pin stoppers during paint)
• 1 really cool sticker